Cartridge or washer before a new body
Most drips are internals. We replace the mixer when the body is holed, the spindle is finished, or the matching cartridge is no longer made.
Dripping mixers, seized outdoor taps, handles that will not shut
Tap and Mixer Repairs Strand
Tap and mixer repairs in Strand — dripping kitchen mixers, basin bibs that will not shut, outdoor taps that have seized. Cartridge or washer first; a new body when the old one is finished.
01
A drip should be a cartridge or a washer first. A replacement is for when the body is finished, not because the handle is stiff.
A kitchen mixer that will not shut, a basin bib that drips onto porcelain all night, or a garden tap seized after a dry stretch is a cartridge, washer or body job at the fitting. In Strand that is usually a worn cartridge in a mixer, a washer on an older bib, or an outdoor tap that has seized. The repair is local. The quote depends on whether the body can take a new cartridge, whether the same finish is still available, and whether the isolation under the sink still works. Photograph the mixer from the front and from underneath if you can reach the connections. If the drip is an outdoor tap, show the wall plate and whether there is a separate isolation. Name the suburb. We will not publish a figure for a cartridge swap; the part and the access set the job.
What good work includes
Scope the complete requirement.
Isolation is part of the visit
If the under-sink valves are seized, that work belongs on the same ticket. Turning the mains off for a kitchen mixer is possible; it is not the tidy way to do the job.
Outdoor taps have their own failures
A garden tap that has seized or split is often a simple body swap, provided the feed in the wall is sound. A drip at the wall plate can be the connection, not the tap.
Good fit for
Practical solutions for real properties.
The work is assessed according to use, condition, access and the result required.
- ↗Dripping kitchen mixer
- ↗Basin tap that will not shut
- ↗Stiff or stripped handle
- ↗Outdoor tap seized or split
- ↗Shower mixer dripping
- ↗Like-for-like mixer replacement
- ↗Isolation valves that no longer turn
Next step
Need a quote for taps and mixers?
Send the address or suburb, the taps and mixers requirement, approximate extent and a few photos. The reply can then focus on the actual Strand site.
Strand site considerations
Taps and mixers planned for the local site.
People looking for a plumber in Strand are not looking at the Somerset West list under another name. Strand is its own search, and the job still has to be quoted from the pipes on that property: a geyser on the roof, a kitchen line that will not empty, a cistern that runs all night, a burst on the supply, a meter that still turns after every tap is shut. From this site, Strand work is considered from the Helderberg and Somerset West side of the basin. Write Strand in the message so the visit is not filed under the wrong town. A house on a single meter, a complex on a bulk supply, a shop after closing — those change who isolates the water and who meets us at the door. We are not going to invent a list of Strand suburbs, and we are not going to write a shoreline essay. The fault, the photos and who is on site decide the quote.
Name Strand in the message
The search is distinct from Somerset West. Put Strand on the note so the job is scoped against the right town. Photos of the fitting, the damp or the meter still decide the work. This is checked against the taps and mixers scope.
Served from the Helderberg side
There is no second Strand workshop claimed here. Jobs are considered from Somerset West and the Helderberg. Access, isolation and the installation on the property matter more than the town label. This is checked against the taps and mixers scope.
Complexes and bulk meters
If the premises shares a stack or a bulk meter, say who approves the spend and who will be on site. A single-trap kitchen clear is not a building-wide drain job. This is checked against the taps and mixers scope.
How the work moves
A clear path from enquiry to handover.
- 01
Photograph the fitting and the isolation
- 02
Name the suburb and whether the drip is constant
- 03
Confirm a repairable cartridge versus a new body
- 04
Isolate, replace the failed part, restore water
- 05
Check shut-off and the connections underneath
Straight answers
Questions about taps and mixers.
Final recommendations depend on the site. These are useful starting points.
Is taps and mixers available throughout Strand?+
Projects may be considered across Strand, subject to access, scope and programme. Share the address and project information for an initial review.
What affects taps and mixers pricing in Strand?+
The existing condition, access, preparation, materials, extent of work and final written scope all affect the quotation.
What should be checked before work starts?+
The team should understand the current condition, intended use, access, constraints and completion standard before the scope is confirmed.
Related services
Compare the next closest project type.
RELATED
Leak detection Strand
Hidden-leak finding in Strand when the meter still turns, the bill has jumped, or a damp patch will not dry. Isolation, meter check, then acoustic, thermal or tracer work as the layout allows.
Explore service ↗RELATEDEmergency plumbing Strand
Burst, flood and after-hours plumbing queries in Strand. Turn the mains stopcock off first. This page answers the emergency and 24-hour plumber search — it does not claim a night roster.
Explore service ↗RELATEDGeyser repair Strand
Geyser faults in Strand quoted from the unit on your roof or in the cupboard — element, thermostat, valve or a full swap. Photos of the tray and the hatch start the quote.
Explore service ↗Start with the site
Plan your Strand taps and mixers project
Share the service required, approximate extent, location and current condition. A quotation starts with a clear picture of the work.
- Address or suburb
- Service or problem
- Approximate size or extent
- Photographs where possible