Need a plumber quote?Send the suburb, the leak, geyser, burst or drain, and a few photos. We reply from the fault on the property, not a generic price list.
Find the water before you open the floor

Leak Detection Strand

Hidden-leak finding in Strand when the meter still turns, the bill has jumped, or a damp patch will not dry. Isolation, meter check, then acoustic, thermal or tracer work as the layout allows.

Thermal camera aimed at a damp bathroom ceiling stain during leak detection in Somerset West
01

A leak-detection visit should mark the wet path and say what has to be opened — not guess through the wall.

Hidden water in a Strand house rarely shows as a dripping tap. It shows as a municipal bill that jumped, a bathroom wall that stays cold and soft, or a meter disc that keeps spinning when the geyser and every outlet are closed. Sometimes a ceiling stain returns a week after it was painted. Sometimes a cupboard smells of damp and there is no wet joint you can point at. Those are the jobs this page is for. Water leaving the system under a slab, inside a wall, on a buried supply or on a geyser tray that only weeps when the unit cycles is leak detection — not a mixer repair. The work is to locate the wet path with as little opening of the house as the layout allows, then decide what the repair actually is. Across the trade that commonly starts with isolating the property and watching the meter. If water is still leaving, the follow-up is listening for movement under pressure, scanning a floor or wall for a temperature track, and using a tracer where the pipe run is buried or boxed in. Those methods are how the job is typically done. We name them at trade level. We are not listing branded instruments we claim to own. What we need from you is the suburb — Strand, Strand, Gordon's Bay or Helderberg — a description of what you have already noticed, and photos of the meter, the damp and the stopcock. From that we can say whether the next step looks like a detection visit, a visible repair, or a pause while you speak to the insurer. We will not invent a price band on this page. Access and the surface that has to be opened change the figure more than the town name does. A plumber can find some hidden leaks on an ordinary visit: a weeping geyser tray, a joint in a ceiling void, a toilet supply that only shows when the cistern fills. Under-slab work and long buried runs are a dedicated locate before a repair quote. We will say which the job looks like from your photos.

What good work includes

Scope the complete requirement.

01

Start with isolation and the meter

Before anyone talks about opening a floor, the useful first checks are the stopcock, the meter and whether movement stops when the house is isolated. If the disc still turns with every outlet off, water is leaving the system.

02

Follow the wet path

Acoustic listening, thermal scanning and tracer methods are the usual ways a leak is followed through a slab, a wall or a buried run. Which of those is useful depends on the layout you actually have.

03

Open only what the find justifies

A detection visit should narrow the opening. Chasing a stain from room to room without a locate is how a small leak becomes a large making-good bill.

04

Separate the find from the repair

Sometimes the locate and the repair are one visit. Sometimes they are not — a slab find is a different conversation from a visible joint in a ceiling void. We will say which it looks like before anyone commits to opening work.

Good fit for

Practical solutions for real properties.

The work is assessed according to use, condition, access and the result required.

  • ↗Meter still turning with the house isolated
  • ↗Unexplained municipal bill spike
  • ↗Damp patches that will not dry
  • ↗Ceiling stains that return after painting
  • ↗Suspected leak under a slab or in a wall
  • ↗Hiss on a quiet supply
  • ↗Geyser tray that only weeps on a heat cycle
  • ↗Insurer asking for a locate before a claim
Next step

Need a quote for leak detection?

Send the address or suburb, the leak detection requirement, approximate extent and a few photos. The reply can then focus on the actual Strand site.

Strand site considerations

Leak detection planned for the local site.

People looking for a plumber in Strand are not looking at the Somerset West list under another name. Strand is its own search, and the job still has to be quoted from the pipes on that property: a geyser on the roof, a kitchen line that will not empty, a cistern that runs all night, a burst on the supply, a meter that still turns after every tap is shut. From this site, Strand work is considered from the Helderberg and Somerset West side of the basin. Write Strand in the message so the visit is not filed under the wrong town. A house on a single meter, a complex on a bulk supply, a shop after closing — those change who isolates the water and who meets us at the door. We are not going to invent a list of Strand suburbs, and we are not going to write a shoreline essay. The fault, the photos and who is on site decide the quote.

01

Name Strand in the message

The search is distinct from Somerset West. Put Strand on the note so the job is scoped against the right town. Photos of the fitting, the damp or the meter still decide the work. This is checked against the leak detection scope.

02

Served from the Helderberg side

There is no second Strand workshop claimed here. Jobs are considered from Somerset West and the Helderberg. Access, isolation and the installation on the property matter more than the town label. This is checked against the leak detection scope.

03

Complexes and bulk meters

If the premises shares a stack or a bulk meter, say who approves the spend and who will be on site. A single-trap kitchen clear is not a building-wide drain job. This is checked against the leak detection scope.

How the work moves

A clear path from enquiry to handover.

  1. 01

    Collect suburb, symptoms, meter photos and what you have already shut off

  2. 02

    Isolate and confirm whether water is still leaving the system

  3. 03

    Follow the path with the method the layout allows

  4. 04

    Mark the locate and say what has to be opened

  5. 05

    Quote the repair as its own step when it is not the same visit

Straight answers

Questions about leak detection.

Final recommendations depend on the site. These are useful starting points.

Is leak detection available throughout Strand?+

Projects may be considered across Strand, subject to access, scope and programme. Share the address and project information for an initial review.

What affects leak detection pricing in Strand?+

The existing condition, access, preparation, materials, extent of work and final written scope all affect the quotation.

What should be checked before work starts?+

The team should understand the current condition, intended use, access, constraints and completion standard before the scope is confirmed.

Start with the site

Plan your Strand leak detection project

Share the service required, approximate extent, location and current condition. A quotation starts with a clear picture of the work.

  • Address or suburb
  • Service or problem
  • Approximate size or extent
  • Photographs where possible

Prefer to talk? Call +27 60 020 1723. This sends the enquiry to hello@somersetwest-plumbing.co.za.

Call nowQuoteWhatsApp